Power Distribution & Test Equipment

Rental Load Banks, Transformers, Transfer Switches, Power Cable & Distribution Panels

---

Load Bank Products

Portable 60Hz to 400Hz capable load banks, covering a wide range of sizes from 10kW to well over a megawatt. Multiple load banks can be paralleled to create larger systems if required. Reactive modules can be added to test at Power Factor's "PF" other than 1.0 (UNITY), such as .8 PF which is often required for acceptance testing and for some OSHPD and NFPA requirements.

---

Power Transformers

Dry type transformers from 30kVA to 2000kVA (2MVA). Voltages ranging from 120/240 VAC 1PH to 4160 VAC 3PH. (All standard voltages available). We carry a wide range of autotransformers and cover many non-standard voltages such as 600, 690 and 720 VAC. Variable transformers such as small 16kVA VARIAC's up to 83kVA at 480 VAC are also available.

---

Automatic Transfer Switches (ATS)

Automatic Transfer Switches from ASCO, Cutler Hammer, GE and more... ranging from 150A to 3000A in both NEMA 1 & 3R enclosures, we carry both '3 Pole' and '4 Pole' type transfer switches including bypass isolation types. Single Phase and Three Phase switches are available in all common voltages such as 120/240VAC and 208 to 480VAC.

---

Portable Power Cable

Portable power cable comes in variety of types and gauges, we carry Type SC with 400A Cam-Lok ends in the most commonly used AWG sizes; these sizes include #1, 1/0, 2/0 and 4/0. All Type SC portable power cable sets come in lengths of 25', 50' or 100' with one male and one female Cam-Lok end per cable. Both 4/4 and 2/4 multi-conductor cables come in 50' and 100' bare end sections.

---

Power Distribution Panels

Our line of power distribution panels range from a single breaker at 50A to large multi-breaker panels up to 3000A, all 600V class rated.
We also carry main circuit breaker panels up to 4000A and manual disconnects in a variety of sizes and horsepower ratings.

---

5kV - 15kV Load Interrupters

5-15kV Class Metal-Enclosed Load Interrupter Switchgear functions as a prime component of these systems providing necessary switching and overcurrent protection for medium-voltage feeders. It is often used in conjunction with substations. This type of switchgear is most frequently applied as service entrance equipment, although it performs equally well in controlling substation transformers and in sectionalizing medium-voltage feeder systems.

---

Motor Generators / Frequency Conversion

Motor-Generator (MG or M-G) sets provide line conditioning and load isolation for computer systems and other sophisticated electrical systems, such as data centers. M-G sets also perform frequency conversion. Motor-Generators have long life, minimum maintenance costs, low harmonics, and high overload capacities that make motor-generator sets a clear choice over solid-state frequency conversion systems.
Our Motor-Generator rental fleet has many models to choose from and ranges from 6kVA to 312kVA in both 50Hz and 400Hz output.

Last Updated: May 17 2019 16:18:44.